The panel uses high quality optical shaft encoders and trackerballs. All the displays are VFD, which give superb brightness and viewing angles.
The integral power supply is auto selecting which gives worldwide compatibility. Built into the panel is an integral mounting lip, which allows the panel to be sunk into a desktop. Alternatively, the panel can be used free standing on the desk resting on its angled under-tray. Optional fascia colours and materials are available. All keycaps can be removed and replaced with custom engraved legends.
Knob And Button Pairs:
There are 4 groups of these controls. Each group comprises 3 knob and button pairs. Above each group there is a 2 line by 40-character VFD display.
A typical example for the use of these is for the knob to control a variable with button resetting it. The display above the pair can be used to label the control and provide status information for it.
There are 3 rows of buttons, each contains 7 buttons, 1 of which is labeled MORE. Above each row there is a 2 line by 40-character VFD display.
A typical example for the use of these is to use the MORE button to step through banks of controls that have been assigned to the buttons. The display above the buttons can label the controls assigned to them.
Trackerballs And Master Dials:
There are 3 trackerballs, each with a master control dial, 5 buttons (3 of these are labeled as function keys) and a 2 line by 20-character VFD display.
A typical example for the use of these is to control functions where the operator needs to adjust 3 variables simultaneously (e.g. colour correction - YUV or position/size – XYZ). The 2 un-labeled buttons can be used as resets for the controls. Macro functions could be assigned to the 3 function buttons. The display is there to label the controls and provide status information.
There are a group of 5 buttons with transport legends (i.e. play, stop etc). Grouped with these is a jog/shuttle dial.
Management Buttons And Numerical Entry Key Pad:
There is a group of 16 buttons laid out as a numerical entry keypad. Additional buttons in this group are labeled as arithmetic functions, decimal point, CLEAR and MODE. A further 18 buttons are labeled with common functions found in editing and list management such as MARK, CUE, IN, OUT, MEM, RECALL etc. There is also an additional jog/shuttle dial with this group and a 2 line by 40-character VFD display.
The physical connection to the CP100 is via a standard RJ45 10 Base T Ethernet connection. The CP100 uses a simple key-down / key-up and encoder-moved protocol. The host can send text to any of the displays, with the facility for user-defined characters for custom graphics. For information on custom protocols, please contact Tangent Devices.